Insulated-line connector
JJC Series Insulation Piercing Connectors
Sealed piercing connectors for insulated main-to-branch connections without stripping the conductor insulation.
View product family →OVERHEAD LINE PRODUCT SYSTEM
Overhead Line Fittings
Suspension, tension, connection, protection and vibration-control fittings for overhead distribution and transmission line systems.
TECHNICAL OVERVIEW
Selected as a system, not as an isolated item.
KVOYEL reviews conductor data, insulator interfaces, tower or pole geometry, mechanical loads and approved drawings before matching a fitting set. Standard and drawing-based hardware can be packed by structure or BOM code.
KVOYEL PRODUCT CATALOGUE
Explore real product families.
Open a product family to review applications, representative model ranges and the data needed for selection.
Branch connector
T-Type Conductor Connectors
T-shaped connectors for branch connections on insulated overhead conductor systems.
View product family →
Tension fitting
ABC Anchor & Tension Clamps
Wedge and insulated anchor clamps for terminating aerial bundled cable and insulated overhead conductors.
View product family →
Equipment connector
C-Type Equipment Clamps
C-shaped equipment terminal clamps for connecting conductors to electrical equipment terminals and bus interfaces.
View product family →
Compression connector
H-Type Compression Clamps
H-shaped compression connectors for aluminium-to-aluminium and aluminium-to-copper conductor connections.
View product family →
Bolted connector
Parallel Groove Clamps
Bolted parallel-groove clamps for non-tension-bearing conductor joints and branch connections.
View product family →
Line protection fitting
Lightning Protection Piercing Clamps
Piercing and arc-protection fittings for insulated overhead conductors at selected protection points.
View product family →
Tension fitting
Hydraulic Tension Clamps
Hydraulic-compression tension clamps for steel-cored aluminium conductors and high-load dead-end assemblies.
View product family →
Link fitting
Ball Eyes, Sockets & Line Links
Hot-dip galvanized link fittings for connecting insulators, clamps and hardware strings.
View product family →
Preformed fitting
Preformed Armour Rods & Dead-End Grips
Helical preformed fittings for conductor protection, reinforcement and dead-end applications.
View product family →
Protection fitting
Spacer Dampers for Bundled Conductors
Rigid and damping spacers for maintaining bundled-conductor geometry and controlling sub-span motion.
View product family →
Parallel-groove connector
Copper Bronze/Aluminium Parallel Groove Clamps For Grounding & Bonding System
Copper Bronze/Aluminium Parallel Groove Clamps For Grounding & Bonding System for non-tension conductor connections, bonding and grounding interfaces.
View product family →
Parallel-groove connector
Universal Copper & Aluminum Parallel Groove Clamp | Electrical Cable Connector Clamps
Universal Copper & Aluminum Parallel Groove Clamp | Electrical Cable Connector Clamps for non-tension conductor connections, bonding and grounding interfaces.
View product family →
Parallel-groove connector
Tin Plated Copper Parallel Groove Clamp, 8-2/0 AWG Aluminum/Stranded Copper Conductor
Tin Plated Copper Parallel Groove Clamp, 8-2/0 AWG Aluminum/Stranded Copper Conductor for non-tension conductor connections, bonding and grounding interfaces.
View product family →
Parallel-groove connector
ANSI C119.4 Parallel Groove Connector Aluminum PG Clamp
ANSI C119.4 Parallel Groove Connector Aluminum PG Clamp for non-tension aluminium conductor connections and overhead-line branch interfaces.
View product family →
Grounding insulation piercing connector
JBCD Series Insulation Piercing Grounding Connectors
JBCD connectors provide an insulated grounding and temporary test interface on low-voltage overhead insulated conductors without removing the main conductor insulation.
View product family →
Protected T-type branch connector
JXT2 Series Protected T-Type Connectors
JXT2 protected T-type connectors form a compact branch connection on an uncut main conductor for distribution and industrial power systems.
View product family →
Integral insulated grounding clamp
JDL Integral Insulated Grounding Clamps
JDL insulated grounding clamps provide an integrated grounding loop for discharge, testing and maintenance connections on insulated overhead conductors.
View product family →Insulated grounding and transition clamp
BYD & BYDG Insulated Grounding Clamps
BYD and BYDG grounding clamps cover aluminium, copper and copper-aluminium transition conductor combinations with a protected grounding loop.
View product family →
Bunched-cable strain clamp
JNS Four-Core Bunched Cable Strain Clamps
JNS strain clamps secure two-core and four-core low-voltage aerial bundled cable at terminal and tension structures.
View product family →
Aluminium compression connector
AMP Aluminium Compression Clamps
AMP compression clamps provide non-magnetic aluminium compression connections for overhead jumpers, branch leads and service conductors.
View product family →C-type wedge connector
JXL & JXLD C-Type Wedge Clamps
JXL and JXLD C-type wedge clamps provide non-tension branch, T-connection and temporary grounding interfaces for overhead conductors.
View product family →
Hydraulic compression tension clamp
NY Series Hydraulic Compression Tension Clamps
NY series compression tension clamps transfer full conductor tension at terminal and strain structures while providing a coordinated jumper connection for AAC, AAAC and ACSR conductors.
View product family →
Trunnion suspension clamp
XGU & XGF Overhead Conductor Suspension Clamps
XGU and XGF suspension clamps support bare overhead conductors at tangent structures while allowing controlled conductor movement and a project-matched connection to the insulator string.
View product family →Jumper suspension clamp
XCS Jumper Suspension Clamps
XCS jumper suspension clamps control and support jumper conductors at strain towers, terminal structures and substation interfaces without imposing full line tension on the jumper.
View product family →
Stockbridge aeolian vibration damper
FD & FG Stockbridge Vibration Dampers
FD and FG Stockbridge dampers reduce wind-induced aeolian vibration in conductors and earth wires through tuned messenger-strand and counterweight assemblies.
View product family →
Jumper spacer damper
FRY Jumper Spacer Dampers
FRY spacer dampers maintain controlled separation between twin jumper conductors while limiting wind-driven movement and conductor-to-conductor contact.
View product family →Rigid bundled-conductor spacer
MRJ Rigid Bundle Spacers
MRJ rigid spacers maintain the designed separation of twin bundled conductors in jumper and short-span arrangements where a fixed geometry is required.
View product family →Flexible bundle spacer damper
FJZ Flexible Spacer Dampers
FJZ flexible spacer dampers combine bundle-spacing control with articulated elastomer damping for twin, triple, quad and higher bundled-conductor systems.
View product family →
Insulator-string connection hardware
U-Type Shackles & Clevis Links
U-type shackles and clevis links connect insulator strings, yoke plates and line fittings while providing project-matched mechanical strength and articulation.
View product family →Ball-and-socket insulator hardware
Socket Clevises, Ball Eyes & Extension Links
Socket clevises, ball eyes and extension links coordinate the ball-and-socket interfaces between insulators, clamps and string hardware for suspension and tension assemblies.
View product family →
Insulator-string load-distribution plate
Yoke Plates & Link Plates
Yoke plates and link plates distribute mechanical loads across single, twin and multiple insulator strings and coordinate the attachment of bundled-conductor fittings.
View product family →PRODUCT RANGE
Typical supply scope.
Suspension clamps and assemblies
Add to RFQ →Tension and dead-end assemblies
Add to RFQ →Yoke plates and link fittings
Add to RFQ →Armour rods and repair fittings
Add to RFQ →Spacers and spacer dampers
Add to RFQ →Vibration dampers and conductor accessories
Add to RFQ →APPLICATIONS
Where this system is used.
- Single and bundled conductors
- Distribution and transmission lines
- Long-span crossings
- New construction and line rehabilitation
RFQ INPUTS
Information needed for matching.
- 1Conductor type and diameter
- 2Rated tensile strength
- 3Insulator coupling
- 4Mechanical load
- 5Structure drawing
- 6BOM and assembly drawing
STANDARDS & SPECIFICATIONS
Confirmed item by item.
Final compliance depends on the approved project specification, drawings, voltage class, test requirements and destination utility.
IEC 61284IEC 61897IEC 60120Project drawingsUtility technical specification
BUYER QUESTIONS
Direct technical answers.
Can fittings be manufactured from customer drawings?
Yes. Drawing-based metal fittings can be reviewed for material, dimensions, process, finish, inspection and packing requirements before production.
How are duplicate items in fitting sets avoided?
The BOM and assembly drawings are normalized before quotation so kit components and separately listed hardware can be checked for overlap.