FDZ Series Combined Type Spacer Damper
Spacer Dampers & Vibration Control · Drawing-confirmed project supply
FDZ combined spacer dampers require matching to conductor-bundle geometry and the approved vibration-control design. Send bundle arrangement and spacing, conductor construction and diameter, clamp interfaces and installation requirements for technical review.
FDZ Combined Spacer Damper: product overview
FDZ combined spacer dampers require matching to conductor-bundle geometry and the approved vibration-control design. Send bundle arrangement and spacing, conductor construction and diameter, clamp interfaces and installation requirements for technical review.
KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.
Published specifications and model selection
Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.
| Product | FDZ Series Combined Type Spacer Damper |
|---|---|
| Category | Spacer Dampers & Vibration Control |
| Representative range / models | FDZ combined spacer-damper series |
| Standards / reference basis | Approved project specification; Confirmed manufacturer data and technical drawing |
| Typical applications | Aeolian-vibration control on overhead conductors and earth wires; Bundled-conductor spacing and subspan-motion control; New lines, uprating projects and corrective maintenance |
| Final dimensions and ratings | Confirmed against the approved drawing, equipment interface and project specification |
| Supply basis | Project-specific RFQ, coordinated documentation and export packing |
Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.
Where this product family is typically used.
Aeolian-vibration control on overhead conductors and earth wires
Conductor or bundle geometry matched before damper selection
Bundled-conductor spacing and subspan-motion control
Placement reviewed against span and vibration requirements
New lines, uprating projects and corrective maintenance
Clamp interface and installation schedule coordinated with line hardware
From technical approval to a defined supply scope.
FDZ combined spacer dampers require matching to conductor-bundle geometry and the approved vibration-control design. Send bundle arrangement and spacing, conductor construction and diameter, clamp interfaces and installation requirements for technical review.
FDZ Series Combined Type Spacer Damper: conductor spacing and vibration-control approval
Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for FDZ Series Combined Type Spacer Damper.
| Item | Information for technical approval |
|---|---|
| 01 | Bundle arrangement and subconductor spacing |
| 02 | Conductor construction and diameter |
| 03 | Clamp interfaces and damper configuration |
| 04 | Approved installation schedule |
Coordinate FDZ bundle spacing, clamp interfaces and installation positions on the same approved drawing.
Define the BOQ supply scope
Use the approved conductor and installation schedule to identify each damper or spacer item. State the bundle arrangement where applicable, clamp interfaces and included fastening parts. Separate individual units from complete span or bundle packages.
Technical submittals and inspection requirements
Request the offered-model drawing and the installation information required by the line design. Identify the specified vibration, spacing, mechanical or inspection acceptance requirements and confirm which supporting records apply to the proposed configuration.
Packing, identification and delivery
Use conductor, bundle and installation-schedule references for identification. Align quantities and delivery groups with the approved placement schedule, including separately ordered clamps or accessories.
Buyer questions
Can the unit quantity be determined only from the line voltage?
Use the approved line layout, conductor data and installation schedule to determine the required configuration and quantity. Submit the project placement requirements with the RFQ.
How should FDZ Series Combined Type Spacer Damper be identified in the RFQ?
Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.
Related selection resources
Send these details for an accurate offer.
A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.
Have a BOQ, drawing or equipment schedule?
Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.
PRODUCT SELECTION AND PROCUREMENT
Compare products and prepare your quotation.
Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.