UL Type Shackle
Link Fittings & Yoke Plates · Drawing-confirmed project supply
UL type shackles are selected by their connection geometry within the overhead-line hardware assembly. Send the opening, pin dimensions, assembly drawing, required mechanical duty and finish specification for review.
UL Type Shackle for Line Fittings: product overview
UL type shackles are selected by their connection geometry within the overhead-line hardware assembly. Send the opening, pin dimensions, assembly drawing, required mechanical duty and finish specification for review.
KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.
Review the available construction and product views.
Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.
Published specifications and model selection
Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.
| Product | UL Type Shackle |
|---|---|
| Category | Link Fittings & Yoke Plates |
| Representative range / models | Drawing-confirmed configurations |
| Standards / reference basis | Approved project specification; Confirmed manufacturer data and technical drawing |
| Typical applications | Overhead distribution lines; Overhead transmission lines; Utility-pole construction; Line maintenance and rehabilitation |
| Final dimensions and ratings | Confirmed against the approved drawing, equipment interface and project specification |
| Supply basis | Project-specific RFQ, coordinated documentation and export packing |
Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.
Where this product family is typically used.
Overhead distribution lines
Configuration confirmed against the approved project interface
Overhead transmission lines
Material and finish reviewed before quotation
Utility-pole construction
Export packing and documentation coordinated to the order
Line maintenance and rehabilitation
From technical approval to a defined supply scope.
UL type shackles are selected by their connection geometry within the overhead-line hardware assembly. Send the opening, pin dimensions, assembly drawing, required mechanical duty and finish specification for review.
UL Type Shackle: insulator-string connection approval
Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for UL Type Shackle.
| Item | Information for technical approval |
|---|---|
| 01 | UL shackle opening and pin dimensions |
| 02 | Mating hardware thickness and geometry |
| 03 | Specified mechanical duty |
| 04 | Material, finish and assembly drawing |
Define the BOQ supply scope
Define the fitting and its pins or locking parts in the string bill of materials. Identify each adjacent fitting or insulator as a separate BOQ item unless the quotation explicitly covers the assembled string hardware.
Technical submittals and inspection requirements
Request the exact offered-model drawing and identify required coupling, material, finish and mechanical acceptance records. Confirm the model reference and both mating interfaces against the approved string drawing before accepting a substitution.
Packing, identification and delivery
Mark fittings and loose locking parts by model and BOQ reference. Reconcile the component quantities with the number of suspension or tension strings rather than relying on an unspecified set quantity.
Buyer questions
Is a matching product name sufficient for replacement approval?
Review the coupling and pin dimensions, mating component geometry and required mechanical duty. The offered model drawing and the approved string assembly should identify the same interfaces.
How should UL Type Shackle be identified in the RFQ?
Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.
Related selection resources
Send the BOQ and drawings for quotation
UL Shackles — configuration and purchasing data
Elongated U-shaped link with a transverse bolt, nut and retaining pin.
| Product reference | UL Shackles |
|---|---|
| Configuration shown | Elongated U-shaped link with a transverse bolt, nut and retaining pin. |
| Selection dimensions and interfaces | Pin or bolt diameter; connection opening and plate thickness; hole spacing or adjustment positions; required mechanical duty. |
| Quotation documents | Approved assembly drawing, mating fittings and load schedule |
The photograph shows a representative configuration. Final dimensions, ratings and inspection requirements follow the approved model drawing and purchase specification.
Send these details for an accurate offer.
A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.
Have a BOQ, drawing or equipment schedule?
Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.
PRODUCT SELECTION AND PROCUREMENT
Compare products and prepare your quotation.
Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.