Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · LINK FITTINGS & YOKE PLATES U & UJ Type Shackles
PROJECT-MATCHED OVERHEAD LINE EQUIPMENT

U & UJ Type Shackles

Link Fittings & Yoke Plates · Drawing-confirmed project supply

KOVYEL U and UJ type shackles provide compact U-bolt connections in insulator strings and tower hardware. Models cover rated mechanical loads from 35 to 100 kN.

Drawing-Matched Project RFQ Supply Model, dimension, conductor range and mechanical-load data confirmed by KOVYEL for the selected assembly
Product categoryLink Fittings & Yoke Plates
Representative rangeU-1240 to U-2290
Technical basisModel, dimension, conductor range and mechanical-load data confirmed by KOVYEL for the selected assembly
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

U & UJ Type Shackles: product overview

KOVYEL U and UJ type shackles provide compact U-bolt connections in insulator strings and tower hardware. Models cover rated mechanical loads from 35 to 100 kN.

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

PRODUCT IMAGES

Review the available construction and product views.

Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

ProductU & UJ Type Shackles
CategoryLink Fittings & Yoke Plates
Representative range / modelsU-1240 to U-2290; UJ-0780 to UJ-2280
Standards / reference basisModel, dimension, conductor range and mechanical-load data confirmed by KOVYEL for the selected assembly
Typical applicationsInsulator-string and tower-hardware assemblies; Overhead transmission and distribution lines; New construction and maintenance projects
U-series rated load35-100 kN
UJ-series rated load60-100 kN
Body width C40-90 mm depending on model
Rod diameter D12-22 mm
Overall length L80-160 mm
MaterialHot-dip galvanized steel with stainless-steel cotter pins
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Insulator-string and tower-hardware assemblies

Compact U-bolt hardware connection

02

Overhead transmission and distribution lines

35-100 kN rated-load options

03

New construction and maintenance projects

U and UJ dimensional variants

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

For purchasing teams and project engineers: confirm the exact U & UJ Type Shackles configuration, included components and required acceptance documents before comparing quotations.

U & UJ Type Shackles: insulator-string connection approval

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for U & UJ Type Shackles.

ItemInformation for technical approval
01Exact offered model and purchase or BOQ item for U & UJ Type Shackles, with the required drawing or specification revision.
02Exact fitting model and both mating coupling or pin interfaces.
03Complete assembly geometry, mechanical duty, material and finish.
04Included pins, locks and other components and required inspection records.

Define the BOQ supply scope

Define the fitting and its pins or locking parts in the string bill of materials. Identify each adjacent fitting or insulator as a separate BOQ item unless the quotation explicitly covers the assembled string hardware.

Technical submittals and inspection requirements

Request the exact offered-model drawing and identify required coupling, material, finish and mechanical acceptance records. Confirm the model reference and both mating interfaces against the approved string drawing before accepting a substitution.

Packing, identification and delivery

Mark fittings and loose locking parts by model and BOQ reference. Reconcile the component quantities with the number of suspension or tension strings rather than relying on an unspecified set quantity.

Quotation and order planning

Send quantities by exact model and configuration, destination, requested delivery date and required quotation terms. Identify complete assemblies, loose components and spares separately. Ask the quotation to confirm minimum order quantity where applicable, delivery proposal, packing, inspection documents and any phased-shipment requirements. Agree the actual commercial and documentation scope before order release.

Buyer questions

Is a matching product name sufficient for replacement approval?

Review the coupling and pin dimensions, mating component geometry and required mechanical duty. The offered model drawing and the approved string assembly should identify the same interfaces.

How should U & UJ Type Shackles be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

PRODUCT SELECTION SUMMARY

U & UJ Type Shackles: key facts for technical buyers.

Concise catalogue facts for model comparison, product matching and AI-assisted technical research.

What is U & UJ Type Shackles?

KOVYEL U and UJ type shackles provide compact U-bolt connections in insulator strings and tower hardware. Models cover rated mechanical loads from 35 to 100 kN. The listed range is U-1240 to U-2290; UJ-0780 to UJ-2280.

Which models or ratings are covered?

The published KOVYEL range is U-1240 to U-2290; UJ-0780 to UJ-2280. Final configuration is confirmed against the required electrical, mechanical and dimensional data.

What information is needed to select U & UJ Type Shackles?

For a matched quotation, provide: Required U or UJ model and quantity; Approved connection drawing, load direction and specified mechanical load; Rod diameter, inside width, overall length and thread dimensions; Mating plate or attachment dimensions and installation clearances; Material, galvanizing, nuts, washers and required locking parts; Required project standards and test documents, destination and delivery schedule.

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Required U or UJ model and quantity
02Approved connection drawing, load direction and specified mechanical load
03Rod diameter, inside width, overall length and thread dimensions
04Mating plate or attachment dimensions and installation clearances
05Material, galvanizing, nuts, washers and required locking parts
06Required project standards and test documents, destination and delivery schedule

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

PRODUCT AND INTERFACE SELECTION

Match insulator-string connecting hardware.

Compare the assembly layout, pin diameter, clevis opening, plate dimensions and rated mechanical load. These fittings connect different positions in a string and require a coordinated interface drawing.

PROJECT INQUIRY

Request a quotation for U & UJ Type Shackles

Inquiry scope: U & UJ Type Shackles

Add technical details (optional)