Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · SINGLE CABLE CLEATS 16-19mm CCAL1H2732-X AL Single Cable Cleat 1H Clamp Type
METAL CABLE CLEAT · CATALOGUE-BACKED RANGE

16-19mm CCAL1H2732-X AL Single Cable Cleat 1H Clamp Type

Single Cable Cleats · Drawing-confirmed project supply

16-19mm CCAL1H2732-X AL Single Cable Cleat 1H Clamp Type for controlled cable support and restraint in utility, substation and industrial power installations.

Drawing-Matched Project RFQ Supply Approved project specification
Product categorySingle Cable Cleats
Representative rangeSingle and trefoil cable arrangements
Technical basisApproved project specification
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

CCAL1H2732-X 16–19 mm Aluminum Cable Cleat: product overview

16-19mm CCAL1H2732-X AL Single Cable Cleat 1H Clamp Type for controlled cable support and restraint in utility, substation and industrial power installations.

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

Product16-19mm CCAL1H2732-X AL Single Cable Cleat 1H Clamp Type
CategorySingle Cable Cleats
Representative range / modelsSingle and trefoil cable arrangements; Project-matched cable diameter ranges; Stainless-steel or aluminium construction
Standards / reference basisApproved project specification
Typical applicationsSubstation cable systems; Power cable routes; Cable transition sections; Utility and industrial installations
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Substation cable systems

Cable range matched to the approved cable schedule

02

Power cable routes

Mounting arrangement selected for the support structure

03

Cable transition sections

Material selected for electrical and environmental conditions

04

Utility and industrial installations

Short-circuit restraint verified against project requirements

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

Match the exact CCAL1H2732-X 16–19 mm Aluminum Cable Cleat model to the approved cable, equipment and installation schedule before comparing the supply scope and required acceptance documents.

CCAL1H2732-X 16–19 mm Aluminum Cable Cleat: cable layout, restraint and support approval

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for CCAL1H2732-X 16–19 mm Aluminum Cable Cleat.

ItemInformation for technical approval
01Exact offered model and BOQ item for CCAL1H2732-X 16–19 mm Aluminum Cable Cleat, with the controlling drawing revision.
02Actual cable outside diameter, cable count and single, trefoil, quad or multicore layout.
03Cleat body and liner requirements, mounting-hole dimensions and matched fixing hardware.
04Support spacing, specified restraint duty, installation procedure and configuration-specific test evidence.

Define the BOQ supply scope

Specify the actual cable layout and the exact cleat and fixing arrangement. Separate single, trefoil, quad and multicore configurations in the BOQ. List liners, bolts, support channels and mounting accessories explicitly and clarify whether each offer covers a cleat alone or the complete installed fixing set.

Technical submittals and inspection requirements

Provide cable outside diameters, the support drawing, spacing and project restraint requirements. Request the offered cleat drawing, installation and tightening instructions and applicable acceptance records. Where short-circuit performance or IEC 61914 compliance is required, confirm the tested cable layout, fixing spacing, supporting structure and exact offered configuration; a catalogue title alone does not establish that performance.

Packing, identification and delivery

Identify cleats by model, cable layout, size and BOQ item. Keep liners and matched fasteners identifiable, and reconcile the quantity by support location and separately ordered spare parts.

Buyer questions

Can short-circuit suitability be established from cable diameter alone?

No. The project design must also establish the required duty, cable layout, cleat spacing, fixing arrangement and supporting structure. Review applicable test evidence for the exact proposed configuration.

How should CCAL1H2732-X 16–19 mm Aluminum Cable Cleat be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Cable outside diameter
02Single, trefoil or multicore arrangement
03Required short-circuit duty
04Cleat spacing and support drawing
05Material and fixing size
06Required quantity

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

PRODUCT SELECTION AND PROCUREMENT

Compare products and prepare your quotation.

Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.

PROJECT INQUIRY

Request a quotation for 16-19mm CCAL1H2732-X AL Single Cable Cleat 1H Clamp Type

Inquiry scope: 16-19mm CCAL1H2732-X AL Single Cable Cleat 1H Clamp Type

Add technical details (optional)