Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · HEAT-SHRINK CABLE JOINTS, TERMINATIONS & INSULATION ACCESSORIES 1 kV Heat-Shrink Cable Terminations
HEAT-SHRINK CABLE TERMINATIONS

1 kV Heat-Shrink Cable Terminations

Heat-Shrink Cable Joints, Terminations & Insulation Accessories · Drawing-confirmed project supply

KOVYEL 1 kV heat-shrink cable terminations cover single-core through five-core PVC, XLPE and rubber-insulated power cables from 10 to 500 mm².

Drawing-Matched Project RFQ Supply Catalogue technical data and project requirements confirmed by KOVYEL before supply
Product categoryHeat-Shrink Cable Joints, Terminations & Insulation Accessories
Representative rangeSY-1
Technical basisCatalogue technical data and project requirements confirmed by KOVYEL before supply
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

1 kV Heat-Shrink Cable Terminations: product overview

KOVYEL 1 kV heat-shrink cable terminations cover single-core through five-core PVC, XLPE and rubber-insulated power cables from 10 to 500 mm².

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

PRODUCT IMAGES

Review the available construction and product views.

Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

Product1 kV Heat-Shrink Cable Terminations
CategoryHeat-Shrink Cable Joints, Terminations & Insulation Accessories
Representative range / modelsSY-1; 10-500 mm²
Standards / reference basisCatalogue technical data and project requirements confirmed by KOVYEL before supply
Typical applicationsPower cable termination and connection; PVC, XLPE and rubber-insulated cables; Utility, building and industrial distribution systems
Rated voltage0.6/1 kV
Core configurationsSingle-core, two-core, three-core, four-core and five-core
Model rangeSY-1/1.0 through SY-1/5.4
Conductor range10-16, 25-50, 70-120, 150-240 or 300-500 mm²
Insulation tube length600, 800 or 1000 mm depending on configuration
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Power cable termination and connection

Heat-shrink insulation system

02

PVC, XLPE and rubber-insulated cables

Multiple conductor-size ranges

03

Utility, building and industrial distribution systems

Single-core and multicore configurations

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

For purchasing teams and project engineers: confirm the exact 1 kV Heat-Shrink Cable Terminations configuration, included components and required acceptance documents before comparing quotations.

1 kV Heat-Shrink Cable Terminations: cable end, installation environment and termination approval

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for 1 kV Heat-Shrink Cable Terminations.

ItemInformation for technical approval
01Exact offered model and purchase or BOQ item for 1 kV Heat-Shrink Cable Terminations, with the required drawing or specification revision.
02Cable construction, conductor size, insulation dimensions and voltage designation.
03Indoor or outdoor environment, terminal interface, clearances and bonding arrangement.
04Exact cold- or heat-shrink kit, complete components and installation and acceptance records.

Define the BOQ supply scope

Specify each cable end by cable construction and indoor or outdoor installation arrangement. List lugs, stress-control and sealing components, earth bonding, skirts and mounting accessories explicitly. Clarify the equipment-terminal and cable-support supply separately.

Technical submittals and inspection requirements

Provide cable construction and dimensional data, voltage designation, equipment-terminal drawing and site conditions. Request exact offered-kit selection and installation instructions and project-required test records. Confirm creepage, clearances and bonding arrangements where required by the approved design.

Packing, identification and delivery

Identify kits by cable designation, end location and circuit. Reconcile quantities by cable end and confirm included lugs and earth components, storage requirements and shelf-life information where applicable.

Quotation and order planning

Send quantities by exact model and configuration, destination, requested delivery date and required quotation terms. Identify complete assemblies, loose components and spares separately. Ask the quotation to confirm minimum order quantity where applicable, delivery proposal, packing, inspection documents and any phased-shipment requirements. Agree the actual commercial and documentation scope before order release.

Buyer questions

Are indoor and outdoor termination kits interchangeable?

Confirm the actual installation environment, cable construction, clearances and required insulation and sealing performance. Use the offered-model instructions and the approved equipment interface to select the kit.

How should 1 kV Heat-Shrink Cable Terminations be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

PRODUCT SELECTION SUMMARY

1 kV Heat-Shrink Cable Terminations: key facts for technical buyers.

Concise catalogue facts for model comparison, product matching and AI-assisted technical research.

What is 1 kV Heat-Shrink Cable Terminations?

KOVYEL 1 kV heat-shrink cable terminations cover single-core through five-core PVC, XLPE and rubber-insulated power cables from 10 to 500 mm². The listed range is SY-1; 10-500 mm².

Which models or ratings are covered?

The published KOVYEL range is SY-1; 10-500 mm². Final configuration is confirmed against the required electrical, mechanical and dimensional data.

What information is needed to select 1 kV Heat-Shrink Cable Terminations?

For a matched quotation, provide: Required termination model, cable voltage designation and kit quantity; Cable core count, conductor material and cross-section; Cable insulation type, diameter over insulation and sheath outside diameter; Indoor or outdoor location, cable screen/armour and earthing arrangement; Termination layout, lug dimensions and required kit components; Project drawings, required standards and test documents, delivery destination and schedule.

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Required termination model, cable voltage designation and kit quantity
02Cable core count, conductor material and cross-section
03Cable insulation type, diameter over insulation and sheath outside diameter
04Indoor or outdoor location, cable screen/armour and earthing arrangement
05Termination layout, lug dimensions and required kit components
06Project drawings, required standards and test documents, delivery destination and schedule

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

CABLE ACCESSORY SELECTION

Compare relevant cable accessories.

Compare the published model ranges, applications and quotation inputs. Final selection follows the project voltage, cable or busbar dimensions and connection interface.

PROJECT INQUIRY

Request a quotation for 1 kV Heat-Shrink Cable Terminations

Inquiry scope: 1 kV Heat-Shrink Cable Terminations

Add technical details (optional)