What is 1 kV Flame-Retardant Heat-Shrink Tubing?
KOVYEL 1 kV flame-retardant heat-shrink tubing provides insulation protection for wire connections, cable ends, soldered joints and resistive components. The listed range is 1-150 mm diameter.
KOVYEL · HEAT-SHRINK CABLE JOINTS, TERMINATIONS & INSULATION ACCESSORIES
PROJECT-MATCHED OVERHEAD LINE EQUIPMENT
1 kV Flame-Retardant Heat-Shrink Tubing
Heat-Shrink Cable Joints, Terminations & Insulation Accessories · Drawing-confirmed project supply
KOVYEL 1 kV flame-retardant heat-shrink tubing provides insulation protection for wire connections, cable ends, soldered joints and resistive components.
Product categoryHeat-Shrink Cable Joints, Terminations & Insulation Accessories
Representative range1-150 mm diameter
Technical basisCatalogue technical data and project requirements confirmed by KOVYEL before supply
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW
Selection begins with the actual project interface.
KOVYEL 1 kV flame-retardant heat-shrink tubing provides insulation protection for wire connections, cable ends, soldered joints and resistive components.
KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.
PRODUCT IMAGES
Review the available construction and product views.
Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.
TECHNICAL & PROCUREMENT DATA
The information buyers need before model confirmation.
Verified catalogue data is shown below. Dimensions, ratings and interfaces that depend on the project remain subject to the approved drawing and purchase specification.
| Product | 1 kV Flame-Retardant Heat-Shrink Tubing |
|---|---|
| Category | Heat-Shrink Cable Joints, Terminations & Insulation Accessories |
| Representative range / models | 1-150 mm diameter |
| Standards / reference basis | Catalogue technical data and project requirements confirmed by KOVYEL before supply |
| Typical applications | Power cable termination and connection; PVC, XLPE and rubber-insulated cables; Utility, building and industrial distribution systems |
| Voltage class | 1 kV |
| Diameter range | 1-150 mm |
| Roll length | 200 m for 1-4 mm; 100 m for 5-22 mm; 25 m for 25-150 mm |
| Application | Wire joints, end treatment, soldered joints and component insulation |
| Final dimensions and ratings | Confirmed against the approved drawing, equipment interface and project specification |
| Supply basis | Project-specific RFQ, coordinated documentation and export packing |
Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.
TYPICAL APPLICATIONS
Where this product family is typically used.
01
Power cable termination and connection
Flame-retardant heat-shrink material
02
PVC, XLPE and rubber-insulated cables
Wide diameter range
03
Utility, building and industrial distribution systems
Supplied in practical roll lengths
PRODUCT SELECTION SUMMARY
1 kV Flame-Retardant Heat-Shrink Tubing: key facts for technical buyers.
Concise catalogue facts for model comparison, product matching and AI-assisted technical research.
Which models or ratings are covered?
The published KOVYEL range is 1-150 mm diameter. Final configuration is confirmed against the required electrical, mechanical and dimensional data.
What information is needed to select 1 kV Flame-Retardant Heat-Shrink Tubing?
Provide Exact model and quantity per conductor size, Conductor designation, core count, cross-section and outside diameter, System voltage, installation arrangement and required mechanical loads.
QUOTATION CHECKLIST
Send these details for an accurate offer.
A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.
01Exact model and quantity per conductor size
02Conductor designation, core count, cross-section and outside diameter
03System voltage, installation arrangement and required mechanical loads
04Connection dimensions and approved assembly drawing
05Required covers, accessories, project standards and test documentation
06Delivery destination, packing and delivery requirements
Have a BOQ, drawing or equipment schedule?
Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.
TECHNICAL PROCUREMENT PATH
Continue from product selection to a complete supply package.
PROJECT INQUIRY