Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · HEAT-SHRINK CABLE JOINTS, TERMINATIONS & INSULATION ACCESSORIES 1 kV Heat-Shrink Cable Joints
HEAT-SHRINK CABLE JOINTS

1 kV Heat-Shrink Cable Joints

Heat-Shrink Cable Joints, Terminations & Insulation Accessories · Drawing-confirmed project supply

KOVYEL 1 kV heat-shrink straight-through joints cover single-core through five-core power cables with PVC, XLPE or rubber insulation.

Drawing-Matched Project RFQ Supply Catalogue technical data and project requirements confirmed by KOVYEL before supply
Product categoryHeat-Shrink Cable Joints, Terminations & Insulation Accessories
Representative rangeJSY-1
Technical basisCatalogue technical data and project requirements confirmed by KOVYEL before supply
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

1 kV Heat-Shrink Cable Joints: product overview

KOVYEL 1 kV heat-shrink straight-through joints cover single-core through five-core power cables with PVC, XLPE or rubber insulation.

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

PRODUCT IMAGES

Review the available construction and product views.

Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

Product1 kV Heat-Shrink Cable Joints
CategoryHeat-Shrink Cable Joints, Terminations & Insulation Accessories
Representative range / modelsJSY-1; 10-500 mm²
Standards / reference basisCatalogue technical data and project requirements confirmed by KOVYEL before supply
Typical applicationsPower cable termination and connection; PVC, XLPE and rubber-insulated cables; Utility, building and industrial distribution systems
Rated voltage0.6/1 kV
Core configurationsSingle-core, two-core, three-core, four-core and five-core
Model rangeJSY-1/1.0 through JSY-1/5.4
Conductor range10-16, 25-50, 70-120, 150-240 or 300-500 mm²
Insulation tube length600, 800 or 1000 mm depending on configuration
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Power cable termination and connection

Heat-shrink insulation system

02

PVC, XLPE and rubber-insulated cables

Multiple conductor-size ranges

03

Utility, building and industrial distribution systems

Single-core and multicore configurations

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

For purchasing teams and project engineers: confirm the exact 1 kV Heat-Shrink Cable Joints configuration, included components and required acceptance documents before comparing quotations.

1 kV Heat-Shrink Cable Joints: cable construction and joint-kit compatibility

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for 1 kV Heat-Shrink Cable Joints.

ItemInformation for technical approval
01Exact offered model and purchase or BOQ item for 1 kV Heat-Shrink Cable Joints, with the required drawing or specification revision.
02Both cable constructions, core count, conductor material and dimensions.
03Insulation, screen, sheath and armour interfaces and earth-continuity arrangement.
04Exact cold- or heat-shrink kit contents, connectors and installation and acceptance records.

Define the BOQ supply scope

Identify each straight joint by the exact cable construction, conductor arrangement and system requirement. Define the complete kit contents and list conductor connectors, screen or earth continuity components, armour bonding and outer protection as included or separate items. Clarify installation and site-test responsibilities.

Technical submittals and inspection requirements

Provide cable drawings and the project voltage designation, including PILC or extruded insulation where applicable. Request the offered-kit selection range, component list, preparation dimensions and installation instructions. Specify required electrical and environmental acceptance records and confirm applicability to the exact cable pair.

Packing, identification and delivery

Mark kits by model, cable designation and circuit reference. Confirm kit completeness, storage requirements and any shelf-life information. Identify conductor connectors and separately packed components against the same joint location.

Quotation and order planning

Send quantities by exact model and configuration, destination, requested delivery date and required quotation terms. Identify complete assemblies, loose components and spares separately. Ask the quotation to confirm minimum order quantity where applicable, delivery proposal, packing, inspection documents and any phased-shipment requirements. Agree the actual commercial and documentation scope before order release.

Buyer questions

Can a joint kit be selected from voltage and conductor area alone?

Also confirm cable insulation type and dimensions, core count, conductor material, screens, sheath and armour, and the proposed earthing arrangement. Match the exact kit to both cables and the approved installation requirements.

How should 1 kV Heat-Shrink Cable Joints be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

PRODUCT SELECTION SUMMARY

1 kV Heat-Shrink Cable Joints: key facts for technical buyers.

Concise catalogue facts for model comparison, product matching and AI-assisted technical research.

What is 1 kV Heat-Shrink Cable Joints?

KOVYEL 1 kV heat-shrink straight-through joints cover single-core through five-core power cables with PVC, XLPE or rubber insulation. The listed range is JSY-1; 10-500 mm².

Which models or ratings are covered?

The published KOVYEL range is JSY-1; 10-500 mm². Final configuration is confirmed against the required electrical, mechanical and dimensional data.

What information is needed to select 1 kV Heat-Shrink Cable Joints?

For a matched quotation, provide: Required joint model, cable voltage designation and kit quantity; Cable details at both ends: core count, conductor material and cross-section; Insulation type and diameter, sheath diameter, screen and armour at both ends; Connector type and dimensions, joint layout and available installation space; Installation environment, sealing and screen/armour bonding requirements; Project drawings, required standards and test documents, delivery destination and schedule.

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Required joint model, cable voltage designation and kit quantity
02Cable details at both ends: core count, conductor material and cross-section
03Insulation type and diameter, sheath diameter, screen and armour at both ends
04Connector type and dimensions, joint layout and available installation space
05Installation environment, sealing and screen/armour bonding requirements
06Project drawings, required standards and test documents, delivery destination and schedule

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

CABLE ACCESSORY SELECTION

Compare relevant cable accessories.

Compare the published model ranges, applications and quotation inputs. Final selection follows the project voltage, cable or busbar dimensions and connection interface.

PROJECT INQUIRY

Request a quotation for 1 kV Heat-Shrink Cable Joints

Inquiry scope: 1 kV Heat-Shrink Cable Joints

Add technical details (optional)