Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · TURNBUCKLES & TENSIONING HARDWARE DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting
GUY-WIRE TURNBUCKLE · CATALOGUE-BACKED RANGE

DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting

Turnbuckles & Tensioning Hardware · Drawing-confirmed project supply

DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting for guy-wire, dead-end and structure-connection assemblies where confirmed by the approved line drawing.

Drawing-Matched Project RFQ Supply DIN 1480
Product categoryTurnbuckles & Tensioning Hardware
Representative rangeProject-matched sizes and end configurations
Technical basisDIN 1480
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

DIN 1480 Galvanized Eye-and-Jaw Turnbuckles: product overview

DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting for guy-wire, dead-end and structure-connection assemblies where confirmed by the approved line drawing.

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

PRODUCT IMAGES

Review the available construction and product views.

Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

ProductDIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting
CategoryTurnbuckles & Tensioning Hardware
Representative range / modelsProject-matched sizes and end configurations; Hot-dip galvanized or stainless-steel options; Pins, bolts and locking components as specified
Standards / reference basisDIN 1480; Approved project specification
Typical applicationsPole and tower guying; Dead-end structure assemblies; Utility structure connections; Line construction and maintenance
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Pole and tower guying

Connection geometry matched to the approved assembly

02

Dead-end structure assemblies

Mechanical class confirmed against the line schedule

03

Utility structure connections

Corrosion protection selected for the service environment

04

Line construction and maintenance

Supplied with coordinated pins and fasteners where specified

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

Confirm the exact DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting configuration against the approved project drawing, required duty and matched component schedule before quotation.

DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting: turnbuckle ends and adjustment-envelope approval

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting.

ItemInformation for technical approval
01Exact model and BOQ reference for DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting, with the controlling drawing revision.
02Both end-fitting geometries and mating pin, eye or hook interfaces.
03Required adjustment envelope, installed length and project-approved service duty.
04Material, finish, locking method, installation instructions and acceptance records.

Define the BOQ supply scope

Define the turnbuckle body and both end fittings on the approved tensioning assembly. State the required adjustment range and distinguish jaw, eye and hook configurations. The responsible designer must confirm the complete assembly and permitted service; the product name alone does not establish lifting approval.

Technical submittals and inspection requirements

Attach the guy-wire and connection schedule and state the required dimensional, material, finish and mechanical acceptance documents. Confirm the proposed model, installation instructions and any purchaser inspection requirements before order release.

Packing, identification and delivery

Use model and assembly references to distinguish matched wedges, clips, pins and threaded parts. Reconcile quantities by guy assembly and identify separately supplied accessories on the packing list.

Buyer questions

Can end-fitting options be chosen from the series name alone?

Confirm both end geometries, pin or eye interfaces, required duty, adjustment range and the approved service conditions. Request the exact offered-model drawing and applicable acceptance records.

How should DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Exact hardware type and size
02Required working or ultimate load
03End and pin configuration
04Material and finish
05Applicable standard or drawing
06Quantity and packing requirement

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

PRODUCT SELECTION AND PROCUREMENT

Compare products and prepare your quotation.

Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.

PROJECT INQUIRY

Request a quotation for DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting

Inquiry scope: DIN1480 Galvanized Turnbuckle | Eye and Jaw Type | Construction And Lifting

Add technical details (optional)