Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · MACHINE, HEX & ARMING BOLTS 3/8″ Hex Head Bolt | Hot Dip Galvanized | 4,250 lbs Tensile | Utility Fasteners
POLE-LINE BOLT AND FASTENER · CATALOGUE-BACKED RANGE

3/8″ Hex Head Bolt | Hot Dip Galvanized | 4,250 lbs Tensile | Utility Fasteners

Machine, Hex & Arming Bolts · Drawing-confirmed project supply

A hex head utility fastener listed with a 3/8-inch nominal diameter and hot-dip galvanized finish. Complete the designation with the required length, thread and material or strength requirement.

Drawing-Matched Project RFQ Supply Approved project specification
Product categoryMachine, Hex & Arming Bolts
Representative rangeCatalogue and drawing-matched sizes
Technical basisApproved project specification
Supply modeProject quotation / coordinated supply
PRODUCT & SUPPLY SCOPE

3/8-inch galvanized hex head bolt

This 3/8-inch item belongs to the hex head bolt range for utility-pole and crossarm assemblies. The diameter distinguishes it from adjacent listings, but does not define the complete bolt or establish suitability for a particular joint.

Selection details for this configuration

Check the total thickness of the connected parts, the required grip and thread engagement, and access for tightening. Match the bolt and nut thread and the coating requirement as a set.

Supply scope and matching parts

State separately whether the quotation must include a matching nut, flat washers, square washers or other assembly hardware. Specify quantities for each component; a product photograph does not establish the included supply set.

CONFIGURATION & COMPARISON

Identify the configuration before comparing offers

Use the listed configuration to identify the item for inquiry. Complete dimensions, required performance and the supply set must be confirmed for the selected order.

Nominal diameter (catalogue designation)3/8 inch
Head styleHex head
Finish listedHot-dip galvanized
Length and threaded lengthSpecify with the assembly drawing
Thread series and pitchSpecify the required mating thread
Material / mechanical requirementState the required grade and supporting documentation

Do not select the joint from a tensile value in the catalogue name alone. The required mechanical grade, applicable test basis and assembly design need to be identified for the actual order.

Compare related catalogue entries

Catalogue entryListed sizeConstruction / mounting reference
1/2-inch galvanized hex head bolt1/2 inchHex head / hot-dip galvanized
3/4-inch galvanized hex head bolt3/4 inchHex head / hot-dip galvanized
3/8-inch galvanized hex head bolt3/8 inchHex head / hot-dip galvanized
5/8-inch galvanized hex head bolt5/8 inchHex head / hot-dip galvanized

These entries are comparison references, not interchangeable substitutes. Confirm the complete configuration and installation requirements.

APPLICATION CHECKS

Match the item to the installation

Utility-pole hardware

Compare the bolt dimensions with the bracket or pole connection drawing.

Crossarm assemblies

Identify the parts being clamped and the complete nut/washer arrangement.

Replacement fasteners

Use the existing approved drawing or a measured reference; head shape alone does not establish interchangeability.

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

Match the exact offered fastener to the approved pole-line or crossarm connection drawing, including dimensions, material, finish and the required assembly components.

3/8" Hex Head Bolt | Hot Dip Galvanized | 4,250 lbs Tensile | Utility Fasteners: hex bolt and matched assembly approval

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for 3/8" Hex Head Bolt | Hot Dip Galvanized | 4,250 lbs Tensile | Utility Fasteners.

ItemInformation for technical approval
01Exact 3/8-inch hex bolt model, length and grip dimensions.
02Thread specification and matched nut and washer arrangement.
03Required mechanical duty, material and hot-dip galvanizing acceptance requirements.
04Head clearance, joint drawing and complete assembly quantities.

Define the BOQ supply scope

Define the bolt, nut and washer combination for each connection. Separate assembly quantities from individual fastener quantities, and identify any specified material, grade, bevel, grip length or finish in the BOQ. Confirm the permitted component combination against the connection drawing before comparing offers.

Technical submittals and inspection requirements

Include the approved connection schedule and the required dimensional, material, finish and inspection records. Identify any assembly acceptance requirements and confirm which documents apply to the offered fastener combination before purchase.

Packing, identification and delivery

Request identification by size, grade where specified, finish and BOQ item. Keep matched assemblies and loose components distinguishable on the packing list.

Buyer questions

Can fasteners with a similar diameter be substituted?

Submit the proposed component combination for approval against the specified material, grade, dimensions, finish and connection requirements. Diameter alone does not close those checks.

How should 3/8" Hex Head Bolt | Hot Dip Galvanized | 4,250 lbs Tensile | Utility Fasteners be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

QUOTATION INPUTS

What to send with your inquiry

  1. 3/8-inch nominal diameter; overall length and threaded length
  2. Thread series/pitch and matching nut requirement
  3. Material grade, mechanical requirement and required documentation
  4. Coating requirement and assembly drawing revision
  5. Bolt, nut and washer quantities; packing labels
  6. Destination and requested delivery schedule

You can start an inquiry before every detail is available. Identify which dimensions or requirements still need confirmation and attach the available drawing or schedule.

Request a quotation for this product →

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

PRODUCT SELECTION AND PROCUREMENT

Compare products and prepare your quotation.

Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.

PROJECT INQUIRY

Request a quotation for 3/8″ Hex Head Bolt | Hot Dip Galvanized | 4,250 lbs Tensile | Utility Fasteners

Inquiry scope: 3/8″ Hex Head Bolt | Hot Dip Galvanized | 4,250 lbs Tensile | Utility Fasteners

Add technical details (optional)