1/2″ Hex Head Bolt | Hot Dip Galvanized | 7800 lbs Tensile | Utility Fasteners
Machine, Hex & Arming Bolts · Drawing-confirmed project supply
A hex head utility fastener listed with a 1/2-inch nominal diameter and hot-dip galvanized finish. Complete the designation with the required length, thread and material or strength requirement.
1/2-inch galvanized hex head bolt
This 1/2-inch item belongs to the hex head bolt range for utility-pole and crossarm assemblies. The diameter distinguishes it from adjacent listings, but does not define the complete bolt or establish suitability for a particular joint.
Selection details for this configuration
Check the total thickness of the connected parts, the required grip and thread engagement, and access for tightening. Match the bolt and nut thread and the coating requirement as a set.
Supply scope and matching parts
State separately whether the quotation must include a matching nut, flat washers, square washers or other assembly hardware. Specify quantities for each component; a product photograph does not establish the included supply set.
Identify the configuration before comparing offers
Use the listed configuration to identify the item for inquiry. Complete dimensions, required performance and the supply set must be confirmed for the selected order.
| Nominal diameter (catalogue designation) | 1/2 inch |
|---|---|
| Head style | Hex head |
| Finish listed | Hot-dip galvanized |
| Length and threaded length | Specify with the assembly drawing |
| Thread series and pitch | Specify the required mating thread |
| Material / mechanical requirement | State the required grade and supporting documentation |
Do not select the joint from a tensile value in the catalogue name alone. The required mechanical grade, applicable test basis and assembly design need to be identified for the actual order.
Compare related catalogue entries
| Catalogue entry | Listed size | Construction / mounting reference |
|---|---|---|
| 1/2-inch galvanized hex head bolt | 1/2 inch | Hex head / hot-dip galvanized |
| 3/4-inch galvanized hex head bolt | 3/4 inch | Hex head / hot-dip galvanized |
| 3/8-inch galvanized hex head bolt | 3/8 inch | Hex head / hot-dip galvanized |
| 5/8-inch galvanized hex head bolt | 5/8 inch | Hex head / hot-dip galvanized |
These entries are comparison references, not interchangeable substitutes. Confirm the complete configuration and installation requirements.
Match the item to the installation
Utility-pole hardware
Compare the bolt dimensions with the bracket or pole connection drawing.
Crossarm assemblies
Identify the parts being clamped and the complete nut/washer arrangement.
Replacement fasteners
Use the existing approved drawing or a measured reference; head shape alone does not establish interchangeability.
What to send with your inquiry
- 1/2-inch nominal diameter; overall length and threaded length
- Thread series/pitch and matching nut requirement
- Material grade, mechanical requirement and required documentation
- Coating requirement and assembly drawing revision
- Bolt, nut and washer quantities; packing labels
- Destination and requested delivery schedule
You can start an inquiry before every detail is available. Identify which dimensions or requirements still need confirmation and attach the available drawing or schedule.
Request a quotation for this product →Have a BOQ, drawing or equipment schedule?
Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.
TECHNICAL PROCUREMENT PATH