Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · MACHINE, HEX & ARMING BOLTS 3/8” Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener
POLE-LINE BOLT AND FASTENER · CATALOGUE-BACKED RANGE

3/8” Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener

Machine, Hex & Arming Bolts · Drawing-confirmed project supply

3/8'' Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener for utility-pole, crossarm and overhead-line construction assemblies.

Drawing-Matched Project RFQ Supply IEEE C135.1
Product categoryMachine, Hex & Arming Bolts
Representative rangeCatalogue and drawing-matched sizes
Technical basisIEEE C135.1
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

3/8 in HDG Carriage Bolts: product overview

3/8'' Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener for utility-pole, crossarm and overhead-line construction assemblies.

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

PRODUCT IMAGES

Review the available construction and product views.

Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

Product3/8” Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener
CategoryMachine, Hex & Arming Bolts
Representative range / modelsCatalogue and drawing-matched sizes; Hot-dip galvanized finish where specified; Project-specific dimensions and packing
Standards / reference basisIEEE C135.1; CSA C83; Approved project specification
Typical applicationsWood and steel utility poles; Crossarm assemblies; Distribution and transmission structures; Line construction and maintenance
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Wood and steel utility poles

Dimensions matched to the approved structure drawing

02

Crossarm assemblies

Material and strength class confirmed before supply

03

Distribution and transmission structures

Corrosion protection selected for the project environment

04

Line construction and maintenance

Consolidated packing with the related pole-line hardware schedule

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

Match the exact offered fastener to the approved pole-line or crossarm connection drawing, including dimensions, material, finish and the required assembly components.

3/8'' Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener: carriage-bolt neck and joint-fit approval

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for 3/8'' Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener.

ItemInformation for technical approval
01Exact 3/8-inch carriage bolt length and thread dimensions.
02Square-neck dimensions and matching hole and head-seat geometry.
03Required mechanical duty, material, galvanizing and nut and washer combination.
04Project-specified IEEE C135.1 or CSA C83 requirements and inspection records.

Define the BOQ supply scope

Define the bolt, nut and washer combination for each connection. Separate assembly quantities from individual fastener quantities, and identify any specified material, grade, bevel, grip length or finish in the BOQ. Confirm the permitted component combination against the connection drawing before comparing offers.

Technical submittals and inspection requirements

Include the approved connection schedule and the required dimensional, material, finish and inspection records. Identify any assembly acceptance requirements and confirm which documents apply to the offered fastener combination before purchase.

Packing, identification and delivery

Request identification by size, grade where specified, finish and BOQ item. Keep matched assemblies and loose components distinguishable on the packing list.

Buyer questions

Can fasteners with a similar diameter be substituted?

Submit the proposed component combination for approval against the specified material, grade, dimensions, finish and connection requirements. Diameter alone does not close those checks.

How should 3/8'' Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Exact item designation
02Diameter, length and thread
03Material and strength requirement
04Finish or coating
05Applicable standard or drawing
06Quantity and packing requirement

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

PRODUCT SELECTION AND PROCUREMENT

Compare products and prepare your quotation.

Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.

PROJECT INQUIRY

Request a quotation for 3/8” Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener

Inquiry scope: 3/8” Carriage Bolt HDG IEEE C135.1 & CSA C83 SEC Compliant Poleline Fastener

Add technical details (optional)