3/8″ Square Head Machine Bolt HDG IEEE C135.1 & CSA C83 Rolled Thread
Machine, Hex & Arming Bolts · Drawing-confirmed project supply
3/8" Square Head Machine Bolt HDG IEEE C135.1 & CSA C83 Rolled Thread for utility-pole, crossarm and overhead-line construction assemblies.
3/8 in Rolled-Thread HDG Square Head Bolts: product overview
3/8" Square Head Machine Bolt HDG IEEE C135.1 & CSA C83 Rolled Thread for utility-pole, crossarm and overhead-line construction assemblies.
KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.
Published specifications and model selection
Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.
| Product | 3/8″ Square Head Machine Bolt HDG IEEE C135.1 & CSA C83 Rolled Thread |
|---|---|
| Category | Machine, Hex & Arming Bolts |
| Representative range / models | Catalogue and drawing-matched sizes; Hot-dip galvanized finish where specified; Project-specific dimensions and packing |
| Standards / reference basis | IEEE C135.1; CSA C83; Approved project specification |
| Typical applications | Wood and steel utility poles; Crossarm assemblies; Distribution and transmission structures; Line construction and maintenance |
| Final dimensions and ratings | Confirmed against the approved drawing, equipment interface and project specification |
| Supply basis | Project-specific RFQ, coordinated documentation and export packing |
Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.
Where this product family is typically used.
Wood and steel utility poles
Dimensions matched to the approved structure drawing
Crossarm assemblies
Material and strength class confirmed before supply
Distribution and transmission structures
Corrosion protection selected for the project environment
Line construction and maintenance
Consolidated packing with the related pole-line hardware schedule
From technical approval to a defined supply scope.
Match the exact offered fastener to the approved pole-line or crossarm connection drawing, including dimensions, material, finish and the required assembly components.
3/8" Square Head Machine Bolt HDG IEEE C135.1 & CSA C83 Rolled Thread: square-head bolt and mounting-clearance approval
Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for 3/8" Square Head Machine Bolt HDG IEEE C135.1 & CSA C83 Rolled Thread.
| Item | Information for technical approval |
|---|---|
| 01 | Exact 3/8-inch square-head model and required length and thread. |
| 02 | Rolled-thread specification and required thread fit after finishing. |
| 03 | Head-seat clearance, grip length and matched nut and washer system. |
| 04 | Project-specified IEEE C135.1 or CSA C83 requirements and mechanical acceptance records. |
Define the BOQ supply scope
Define the bolt, nut and washer combination for each connection. Separate assembly quantities from individual fastener quantities, and identify any specified material, grade, bevel, grip length or finish in the BOQ. Confirm the permitted component combination against the connection drawing before comparing offers.
Technical submittals and inspection requirements
Include the approved connection schedule and the required dimensional, material, finish and inspection records. Identify any assembly acceptance requirements and confirm which documents apply to the offered fastener combination before purchase.
Packing, identification and delivery
Request identification by size, grade where specified, finish and BOQ item. Keep matched assemblies and loose components distinguishable on the packing list.
Buyer questions
Can fasteners with a similar diameter be substituted?
Submit the proposed component combination for approval against the specified material, grade, dimensions, finish and connection requirements. Diameter alone does not close those checks.
How should 3/8" Square Head Machine Bolt HDG IEEE C135.1 & CSA C83 Rolled Thread be identified in the RFQ?
Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.
Related selection resources
Send these details for an accurate offer.
A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.
Have a BOQ, drawing or equipment schedule?
Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.
PRODUCT SELECTION AND PROCUREMENT
Compare products and prepare your quotation.
Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.