
UT Wedge Clamp
UT wedge clamps require matc...
View product familyBrowse the KOVYEL overhead line equipment catalogue by category, product family, application and selection data, then send a product list or BOQ for a matched quotation.
Each category connects the product range with applications, standards, required RFQ data and related catalogue products. KOVYEL supplies equipment and materials only.
01REAL PRODUCT REFERENCEOverhead conductors, wires and aerial cables for distribution, transmission, grounding, guying and utility communications. Request a quotation with the line schedule, route data and required drum lengths. Select AAC, AAAC, ACSR, ACAR or other bare conductors by material, cross-section, stranding, resistance, strength and sag-tension duty. Select insulated overhead or ABC cable by voltage, core arrangement, insulation and installation system. OPGW, ADSS, earth wire and guy strand have different electrical, optical and mechanical functions. State applicable standard, conductor or cable code, design spans, wind/ice/temperature conditions, required fittings, packing, marking, inspection and test documents. Ratings and standards compliance must be supported by evidence for the exact offered construction.
Open product category →
02REAL PRODUCT REFERENCEComposite, porcelain and glass insulators for overhead distribution, transmission, substations and equipment connections. Request a quotation with the insulator schedule, string drawing and service conditions. Select suspension, strain, pin, line-post, station-post, shackle, spool or equipment insulators by system and equipment voltage, insulation level, required creepage distance, pollution severity, mechanical load, coupling or mounting interface, string geometry, housing/material, altitude and environmental conditions. Review insulator pins and pole-top pins, porcelain and glass suspension/strain insulators and composite suspension/tension insulators according to the required function. Electrical and mechanical ratings, creepage, ageing, pollution performance and IEC/ANSI compliance must be supported by documents and tests for the exact offered model and assembly.
Open product category →
03REAL PRODUCT REFERENCEACSR and AAAC overhead line fittings for 11kV and 33kV lines, matched to conductor data, approved drawings and IEC 61284 where specified.
Open product category →
04REAL PRODUCT REFERENCEHot-dip galvanized pole line hardware, crossarm hardware, utility pole bolts, fasteners and drawing-based steel parts for distributor stock and project BOQs. Match each item to the pole schedule, structure drawing, material grade and coating requirement.
Open product category →
05REAL PRODUCT REFERENCEStay assemblies, earth anchors, ground rods, clamps, connectors and earthing materials for overhead line structures and equipment.
Open product category →
06REAL PRODUCT REFERENCEUtility poles, crossarms, monopoles and lattice towers supplied against approved structural, line and foundation drawings. Request a quotation with the structure schedule, loading trees and quantities. Specify structure type and material, overall and above-ground height, section geometry, top and base dimensions, wall thickness or member schedule, conductor and earth-wire arrangement, attachment points, design spans, wind/ice loads, longitudinal and transverse loads, foundation interface, corrosion environment, galvanizing or coating, climbing and safety provisions, marking and transport limits. Poles, crossarms, monopoles and lattice towers have different structural design and fabrication evidence. Strength, deflection, weld quality, galvanizing, fatigue, seismic or standards compliance must be supported by calculations, drawings and tests for the exact offered structure. Coordinate pole hardware through the complete pole-line hardware and guying package.
Open product category →
07REAL PRODUCT REFERENCEProtection and switching equipment for overhead distribution, substations and utility feeder automation. Request a quotation with the single-line diagram, protection philosophy and equipment schedule. Select fuse cutouts and links, surge arresters, disconnect switches, load-break switches, outdoor vacuum circuit breakers or switchgear and RMUs according to their distinct duties. Specify system voltage and frequency, continuous current, fault-making/breaking or withstand duty, insulation level, protection and reclosing functions, CT/PT interfaces, control supply, communications, mounting, environmental conditions and required standards. Isolation, load switching and fault interruption are different duties; ratings and compliance must be supported by documents and tests for the exact offered configuration.
Open product category →
08REAL PRODUCT REFERENCEOil-immersed distribution and power transformers for utility networks, industrial plants and substations. Request a quotation with the transformer schedule, single-line diagram and site data. Specify rated power, HV/LV voltages, phase and frequency, vector group, impedance, tap range and tap-changer type, guaranteed loss limits, insulation level, temperature rise, cooling method, mounting arrangement, oil requirement, bushings or cable boxes, protection and monitoring accessories. Include altitude, ambient temperature, seismic or pollution conditions, transport limits and required tests. Distribution and large power transformers use different design and test scopes. Capacity, losses, efficiency, short-circuit withstand, sound level, temperature rise and IEC/IEEE/GB compliance must be supported by documents for the exact offered unit. Compare distribution transformers and power and substation transformers before final selection.
Open product category →
09REAL PRODUCT REFERENCEPower and control cables, cable accessories, OPGW, ADSS and installation hardware for utility, industrial and overhead-line projects. Request a quotation with the cable schedule, route data and accessory quantities. Specify voltage class, conductor material and cross-section, cores, conductor class, insulation and screen system, armour and sheath, short-circuit duty, installation method, ambient and soil conditions, fire or UV requirements, delivery lengths and required standards. Match each cable to the exact termination or joint, lug or terminal and fixing or cleat system. For utility fiber routes, review OPGW and ADSS optical cables with their matched suspension, dead-end and vibration-control fittings. Electrical, mechanical, optical, fire-performance and standards claims must be supported by documents and tests for the exact offered cable and accessory configuration.
Open product category →701 product families · Select a product to review its technical scope and request a quotation.

UT wedge clamps require matc...
View product family
W type socket eye fittings r...
View product family
WCJB Series Bolted Brass Con...
View product family
WCJC Series Bolted Brass Con...
View product family
WCJF Series Bolted Brass Con...
View product family
KOVYEL Wind-Resistant Dropou...
View product family
Wiring And Other Insulator f...
View product family
Wiring Duct (Round) for Plas...
View product family
Wiring Duct (SLOTTED) for Pl...
View product family
Wiring Duct (SOLID) for Plas...
View product family
WS type socket clevis fittin...
View product family
KOVYEL XCS jumper suspension...
View product familyRELATED PRODUCT RANGES AND RESOURCES