Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · CABLE LUGS & TERMINALS DL, DLS, DTS & DTLS Compression Terminal Lugs
SINGLE AND DOUBLE-HOLE CABLE TERMINAL LUG · CATALOGUE-BACKED RANGE

DL, DLS, DTS & DTLS Compression Terminal Lugs

Cable Lugs & Terminals · Drawing-confirmed project supply

KOVYEL DL, DLS, DTS and DTLS compression terminal lugs cover aluminium and copper cable terminations in sealed, double-hole and standard configurations. The combined range serves conductor sections from 10 to 800 mm².

Drawing-Matched Project RFQ Supply DL, DLS, DTS and DTLS dimension tables and conductor sections confirmed by KOVYEL
Product categoryCable Lugs & Terminals
Representative rangeDL-10 to DL-800; DLS-16 to DLS-500; DTS-16 to DTS-500; DTLS-10 to DTLS-500
Technical basisDL, DLS, DTS and DTLS dimension tables and conductor sections confirmed by KOVYEL
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

DL, DLS, DTS & DTLS Cable Lugs: product overview

KOVYEL DL, DLS, DTS and DTLS compression terminal lugs cover aluminium and copper cable terminations in sealed, double-hole and standard configurations. The combined range serves conductor sections from 10 to 800 mm².

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

PRODUCT IMAGES

Review the available construction and product views.

Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

ProductDL, DLS, DTS & DTLS Compression Terminal Lugs
CategoryCable Lugs & Terminals
Representative range / modelsDL-10 to DL-800; DLS-16 to DLS-500; DTS-16 to DTS-500; DTLS-10 to DTLS-500
Standards / reference basisDL, DLS, DTS and DTLS dimension tables and conductor sections confirmed by KOVYEL
Typical applicationsPower cable terminations; Switchgear and busbar connections; Sealed outdoor terminations; Double-hole equipment connections
DL sealed rangeDL-10 to DL-800; length 70-270 mm; palm width 16-100 mm
DLS double-hole aluminiumDLS-16 to DLS-500; length 115-220 mm; palm width 24-50 mm
DTS copper cable lugsDTS-16 to DTS-500; length 110-215 mm
DTLS bimetallic double-holeDTLS-10 to DTLS-500; length 110-210 mm
Conductor range10-800 mm² depending on series
SelectionConfirm conductor material, section, sealing requirement and hole pattern
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Power cable terminations

Aluminium and copper terminal variants

02

Switchgear and busbar connections

Sealed barrel options

03

Sealed outdoor terminations

Single- and double-hole palms

04

Double-hole equipment connections

10-800 mm² conductor coverage

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

Match the exact DL, DLS, DTS & DTLS Cable Lugs model to the approved cable, equipment and installation schedule before comparing the supply scope and required acceptance documents.

DL, DLS, DTS & DTLS Cable Lugs: cable conductor, terminal palm and compression approval

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for DL, DLS, DTS & DTLS Cable Lugs.

ItemInformation for technical approval
01Exact offered model and BOQ item for DL, DLS, DTS & DTLS Cable Lugs, with the controlling drawing revision.
02Cable conductor material, class or strand construction and cross-section.
03Lug barrel dimensions, terminal palm, hole size and equipment-contact material.
04Matched compression tool and die schedule, installation method and required connection records.

Define the BOQ supply scope

Identify the actual cable conductor and equipment terminal for each lug. Define aluminium, copper or bimetallic requirements and list bolts, insulation and other terminal accessories explicitly. Clarify whether the offer is lug-only or includes matched installation components.

Technical submittals and inspection requirements

Provide the cable construction and terminal drawing. Request the exact lug selection matrix, barrel and palm dimensions, conductor compatibility and matched compression tool, die and installation instructions. Specify required connection acceptance records and confirm their applicability to the proposed cable and equipment terminal.

Packing, identification and delivery

Label connectors by the selected model and main/branch conductor reference. Reconcile quantities by connection type rather than combining different conductor pairs in an unspecified lot.

Buyer questions

Can one conductor cross-section define the connector model?

Provide both main and branch conductor materials, designations and cross-sections. Select the exact model from the applicable matrix and confirm the matched grooves and installation procedure.

How should DL, DLS, DTS & DTLS Cable Lugs be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Exact model and quantity per conductor size
02Conductor designation, core count, cross-section and outside diameter
03System voltage, installation arrangement and required mechanical loads
04Connection dimensions and approved assembly drawing
05Required covers, accessories, project standards and test documentation
06Delivery destination, packing and delivery requirements

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

PRODUCT SELECTION AND PROCUREMENT

Compare products and prepare your quotation.

Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.

PROJECT INQUIRY

Request a quotation for DL, DLS, DTS & DTLS Compression Terminal Lugs

Inquiry scope: DL, DLS, DTS & DTLS Compression Terminal Lugs

Add technical details (optional)