Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · HEAT-SHRINK CABLE JOINTS, TERMINATIONS & INSULATION ACCESSORIES 10/35 kV Busbar Heat-Shrink Tubing
BUSBAR HEAT-SHRINK INSULATION

10/35 kV Busbar Heat-Shrink Tubing

Heat-Shrink Cable Joints, Terminations & Insulation Accessories · Drawing-confirmed project supply

KOVYEL 10/35 kV busbar heat-shrink tubing provides flame-retardant, track-resistant insulation for substation and switchgear busbars.

Drawing-Matched Project RFQ Supply Catalogue technical data and project requirements confirmed by KOVYEL before supply
Product categoryHeat-Shrink Cable Joints, Terminations & Insulation Accessories
Representative range25-150 mm diameter
Technical basisCatalogue technical data and project requirements confirmed by KOVYEL before supply
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

10/35 kV Busbar Heat-Shrink Tubing: product overview

KOVYEL 10/35 kV busbar heat-shrink tubing provides flame-retardant, track-resistant insulation for substation and switchgear busbars.

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

PRODUCT IMAGES

Review the available construction and product views.

Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

Product10/35 kV Busbar Heat-Shrink Tubing
CategoryHeat-Shrink Cable Joints, Terminations & Insulation Accessories
Representative range / models25-150 mm diameter
Standards / reference basisCatalogue technical data and project requirements confirmed by KOVYEL before supply
Typical applicationsSwitchgear busbar insulation; Substation busbar insulation; 10 and 35 kV busbar insulation projects
Voltage classes10 and 35 kV
Diameter range25-150 mm
10 kV roll length50 m at 25 mm; 25 m at 30-150 mm
35 kV roll length20 m
ApplicationBusbar insulation in substations and switchgear
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Switchgear busbar insulation

Thermal stability and flame retardancy

02

Substation busbar insulation

Flexible, crack-resistant insulation

03

10 and 35 kV busbar insulation projects

Tracking resistance for switchgear busbars

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

For purchasing teams and project engineers: confirm the exact 10/35 kV Busbar Heat-Shrink Tubing configuration, included components and required acceptance documents before comparing quotations.

10/35 kV Busbar Heat-Shrink Tubing: busbar joint geometry and insulation approval

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for 10/35 kV Busbar Heat-Shrink Tubing.

ItemInformation for technical approval
01Exact offered model and purchase or BOQ item for 10/35 kV Busbar Heat-Shrink Tubing, with the required drawing or specification revision.
02Actual bar and complete joint dimensions and required insulation duty.
03Recovery and fit requirements, clearances and installation environment.
04Required shapes, lengths, installation instructions and acceptance records.

Define the BOQ supply scope

Identify each busbar section or joint to be covered and specify the exact tubing or protective-cover form. List required shapes, lengths, quantities and fastening accessories. Confirm that insulation covers and tubing are distinct from the current-carrying busbar supply.

Technical submittals and inspection requirements

Provide the busbar and joint drawing, voltage requirements, clearances and installation environment. Request offered-product dimensions, recovery or fit information, installation instructions and specified insulation acceptance records. Confirm suitability for the complete joint rather than the flat bar alone.

Packing, identification and delivery

Identify products by busbar or joint reference, size and required length or shape. Keep cut lengths and joint covers distinguishable and reconcile quantities against the connection schedule.

Quotation and order planning

Send quantities by exact model and configuration, destination, requested delivery date and required quotation terms. Identify complete assemblies, loose components and spares separately. Ask the quotation to confirm minimum order quantity where applicable, delivery proposal, packing, inspection documents and any phased-shipment requirements. Agree the actual commercial and documentation scope before order release.

Buyer questions

Is busbar width sufficient to select the insulation accessory?

Also confirm complete joint geometry, thickness, edges, required recovery or cover fit, voltage requirements and installation clearances against the approved assembly.

How should 10/35 kV Busbar Heat-Shrink Tubing be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

PRODUCT SELECTION SUMMARY

10/35 kV Busbar Heat-Shrink Tubing: key facts for technical buyers.

Concise catalogue facts for model comparison, product matching and AI-assisted technical research.

What is 10/35 kV Busbar Heat-Shrink Tubing?

KOVYEL 10/35 kV busbar heat-shrink tubing provides flame-retardant, track-resistant insulation for substation and switchgear busbars. The listed range is 25-150 mm diameter.

Which models or ratings are covered?

The published KOVYEL range is 25-150 mm diameter. Final configuration is confirmed against the required electrical, mechanical and dimensional data.

What information is needed to select 10/35 kV Busbar Heat-Shrink Tubing?

For a matched quotation, provide: Required busbar tubing voltage class and total quantity or length; Busbar width, thickness or diameter, and assembly drawing; Tubing expanded and recovered dimensions, wall thickness and shrink ratio; Joint geometry, bends, installation clearances and insulated length; Operating environment, colour and required project test documents; Delivery destination, cut or roll packing and required delivery date.

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Required busbar tubing voltage class and total quantity or length
02Busbar width, thickness or diameter, and assembly drawing
03Tubing expanded and recovered dimensions, wall thickness and shrink ratio
04Joint geometry, bends, installation clearances and insulated length
05Operating environment, colour and required project test documents
06Delivery destination, cut or roll packing and required delivery date

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

CABLE ACCESSORY SELECTION

Compare relevant cable accessories.

Compare the published model ranges, applications and quotation inputs. Final selection follows the project voltage, cable or busbar dimensions and connection interface.

PROJECT INQUIRY

Request a quotation for 10/35 kV Busbar Heat-Shrink Tubing

Inquiry scope: 10/35 kV Busbar Heat-Shrink Tubing

Add technical details (optional)