F1554 Gr36 Anchor Rod L type With Nuts
Anchor Bolts & Rods · Drawing-confirmed project supply
F1554 Gr36 Anchor Rod L type With Nuts supplied as foundation hardware for steel poles, monopoles and transmission structures; civil works and installation are excluded.
F1554 Gr36 Anchor Rod L type With Nuts: product overview
F1554 Gr36 Anchor Rod L type With Nuts supplied as foundation hardware for steel poles, monopoles and transmission structures; civil works and installation are excluded.
KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.
Published specifications and model selection
Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.
| Product | F1554 Gr36 Anchor Rod L type With Nuts |
|---|---|
| Category | Anchor Bolts & Rods |
| Representative range / models | Straight, L-type, J-type and bent anchor rods; ASTM F1554 Grade 36, 55 and 105 options; Nuts, washers and template-matched assemblies |
| Standards / reference basis | ASTM F1554; Approved project specification or drawing |
| Typical applications | Steel pole foundations; Monopole base plates; Transmission tower foundations; Substation support structures |
| Final dimensions and ratings | Confirmed against the approved drawing, equipment interface and project specification |
| Supply basis | Project-specific RFQ, coordinated documentation and export packing |
Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.
Where this product family is typically used.
Steel pole foundations
Grade and dimensions matched to the approved foundation drawing
Monopole base plates
Thread length coordinated with base plate and leveling arrangement
Transmission tower foundations
Hot-dip galvanized or specified finish options
Substation support structures
Supply can include matched nuts and washers
From technical approval to a defined supply scope.
Confirm the exact F1554 Gr36 Anchor Rod L type With Nuts configuration against the approved project drawing, required duty and matched component schedule before quotation.
F1554 Gr36 Anchor Rod L type With Nuts: anchor-rod geometry and foundation-interface approval
Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for F1554 Gr36 Anchor Rod L type With Nuts.
| Item | Information for technical approval |
|---|---|
| 01 | Exact model and BOQ reference for F1554 Gr36 Anchor Rod L type With Nuts, with the controlling drawing revision. |
| 02 | Overall length, embedded or bent geometry and threaded projection. |
| 03 | Specified grade, thread dimensions and permitted finish for the offered rod. |
| 04 | Baseplate hole pattern, foundation drawing and included nuts, washers and templates. |
Define the BOQ supply scope
Identify each anchor rod against the approved foundation and baseplate drawings. Specify the straight, bent, L or J configuration, overall and embedded dimensions, threaded projection and accessory scope. List nuts, washers, templates and protective parts explicitly; foundation design and embedment are controlled by the project engineer.
Technical submittals and inspection requirements
Provide the foundation and baseplate drawings, specified material grade, finish and acceptance requirements. Request the offered rod drawing, applicable material and mechanical inspection records, and any specified coating or thread information. Confirm bent geometry and finish compatibility for the exact offered configuration.
Packing, identification and delivery
Use model and assembly references to distinguish matched wedges, clips, pins and threaded parts. Reconcile quantities by guy assembly and identify separately supplied accessories on the packing list.
Buyer questions
Can an anchor rod be selected only by diameter and grade?
Also confirm overall and embedded geometry, threaded projection, baseplate and foundation interfaces, accessories and required acceptance records against the approved foundation design.
How should F1554 Gr36 Anchor Rod L type With Nuts be identified in the RFQ?
Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.
Related selection resources
Send these details for an accurate offer.
A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.
Have a BOQ, drawing or equipment schedule?
Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.
PRODUCT SELECTION AND PROCUREMENT
Compare products and prepare your quotation.
Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.