Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Poleline Hardware
Nuts, Washers & Locking Hardware · Drawing-confirmed project supply
Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Poleline Hardware for utility-pole, crossarm and overhead-line construction assemblies.
HDG Ductile Iron Square Curved Washers: product overview
Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Poleline Hardware for utility-pole, crossarm and overhead-line construction assemblies.
KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.
Review the available construction and product views.
Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.
Published specifications and model selection
Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.
| Product | Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Poleline Hardware |
|---|---|
| Category | Nuts, Washers & Locking Hardware |
| Representative range / models | Catalogue and drawing-matched sizes; Hot-dip galvanized finish where specified; Project-specific dimensions and packing |
| Standards / reference basis | IEEE C135.80; CSA C83; Approved project specification |
| Typical applications | Wood and steel utility poles; Crossarm assemblies; Distribution and transmission structures; Line construction and maintenance |
| Final dimensions and ratings | Confirmed against the approved drawing, equipment interface and project specification |
| Supply basis | Project-specific RFQ, coordinated documentation and export packing |
Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.
Where this product family is typically used.
Wood and steel utility poles
Dimensions matched to the approved structure drawing
Crossarm assemblies
Material and strength class confirmed before supply
Distribution and transmission structures
Corrosion protection selected for the project environment
Line construction and maintenance
Consolidated packing with the related pole-line hardware schedule
From technical approval to a defined supply scope.
Confirm the exact Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Polelin Hardware configuration against the approved project drawing, required duty and matched component schedule before quotation.
Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Polelin Hardware: washer bearing surface and matched joint approval
Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Polelin Hardware.
| Item | Information for technical approval |
|---|---|
| 01 | Exact model and BOQ reference for Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Polelin Hardware, with the controlling drawing revision. |
| 02 | Bolt or rod diameter and washer hole, thickness and outer bearing dimensions. |
| 03 | Flat, curved, beveled or spring geometry and required seating orientation. |
| 04 | Specified material or hardness, finish and compatibility with the matched assembly. |
Define the BOQ supply scope
Specify each washer as part of the approved connection stack. Identify the matched bolt or rod diameter, bearing geometry and material and finish requirements. Separate individual washer quantities from complete fastener sets, and confirm orientation where curved or beveled seating is required.
Technical submittals and inspection requirements
Include the approved connection schedule and the required dimensional, material, finish and inspection records. Identify any assembly acceptance requirements and confirm which documents apply to the offered fastener combination before purchase.
Packing, identification and delivery
Request identification by size, grade where specified, finish and BOQ item. Keep matched assemblies and loose components distinguishable on the packing list.
Buyer questions
Can washers with the same hole diameter be substituted?
Also check thickness, outer bearing dimensions, hardness or material where specified, seating angle or curvature and compatibility with the complete fastener assembly.
How should Cast Square Curved Washer HDG | Ductile Iron Utility Washer | IEEE C135.80 & CSA C83 Polelin Hardware be identified in the RFQ?
Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.
Related selection resources
Send these details for an accurate offer.
A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.
Have a BOQ, drawing or equipment schedule?
Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.
PRODUCT SELECTION AND PROCUREMENT
Compare products and prepare your quotation.
Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.