Overhead line equipment supply for EPC contractors
info@kovyel.com EN FR AR
KOVYEL · WEDGE SOCKETS Cast Steel 1/2” 3/8” Wire Rope Open Wedge Socket Galvanized
DEAD-END WEDGE SOCKET · CATALOGUE-BACKED RANGE

Cast Steel 1/2” 3/8” Wire Rope Open Wedge Socket Galvanized

Wedge Sockets · Drawing-confirmed project supply

Cast Steel 1/2'' 3/8'' Wire Rope Open Wedge Socket Galvanized for guy-wire, dead-end and structure-connection assemblies where confirmed by the approved line drawing.

Drawing-Matched Project RFQ Supply Approved project specification
Product categoryWedge Sockets
Representative rangeProject-matched sizes and end configurations
Technical basisApproved project specification
Supply modeProject quotation / coordinated supply
PRODUCT OVERVIEW

Galvanized Open Wedge Sockets, 1/2 & 3/8 in: product overview

Cast Steel 1/2'' 3/8'' Wire Rope Open Wedge Socket Galvanized for guy-wire, dead-end and structure-connection assemblies where confirmed by the approved line drawing.

KOVYEL confirms final selection against the approved drawing, interface dimensions, service conditions and purchase specification before quotation and supply. Catalogue references define the product family; the approved project documents remain the controlling basis.

PRODUCT IMAGES

Review the available construction and product views.

Images show representative configurations. Final construction, marking and packing are confirmed against the approved project documents.

TECHNICAL & PROCUREMENT DATA

Published specifications and model selection

Published product information is shown below. Confirm the offered model, dimensions, ratings and mating interfaces against the approved drawing and purchase specification before ordering.

ProductCast Steel 1/2” 3/8” Wire Rope Open Wedge Socket Galvanized
CategoryWedge Sockets
Representative range / modelsProject-matched sizes and end configurations; Hot-dip galvanized or stainless-steel options; Pins, bolts and locking components as specified
Standards / reference basisApproved project specification
Typical applicationsPole and tower guying; Dead-end structure assemblies; Utility structure connections; Line construction and maintenance
Final dimensions and ratingsConfirmed against the approved drawing, equipment interface and project specification
Supply basisProject-specific RFQ, coordinated documentation and export packing

Unverified dimensions or performance ratings are not published as fixed values. Submit the controlling drawing or requirement schedule for final confirmation.

TYPICAL APPLICATIONS

Where this product family is typically used.

01

Pole and tower guying

Connection geometry matched to the approved assembly

02

Dead-end structure assemblies

Mechanical class confirmed against the line schedule

03

Utility structure connections

Corrosion protection selected for the service environment

04

Line construction and maintenance

Supplied with coordinated pins and fasteners where specified

SELECTION & PROCUREMENT

From technical approval to a defined supply scope.

For purchasing teams and project engineers: confirm the exact Galvanized Open Wedge Sockets, 1/2 & 3/8 in configuration, included components and required acceptance documents before comparing quotations.

Galvanized Open Wedge Sockets, 1/2 & 3/8 in: rope socket, wedge and attachment review

Use the following product-specific inputs in the technical clarification and identify the controlling drawing revision for Galvanized Open Wedge Sockets, 1/2 & 3/8 in.

ItemInformation for technical approval
01Exact offered model and purchase or BOQ item for Galvanized Open Wedge Sockets, 1/2 & 3/8 in, with the required drawing or specification revision.
02Actual rope construction and diameter and exact matched socket-and-wedge model.
03Mating connection geometry, pin and locking parts and approved service requirements.
04Complete-set documentation, installation instructions and required acceptance records.

Define the BOQ supply scope

Define the exact socket, matched wedge, pin and locking components and the intended rope and service. Clarify individual components versus complete socket sets. The project engineer must approve the complete termination and service requirements before purchase.

Technical submittals and inspection requirements

Provide the actual rope construction and diameter, mating connection drawing and required duty. Request the exact offered socket-and-wedge dimensions, material and acceptance records and manufacturer installation and inspection instructions. Confirm any required rated-duty or certification evidence for the complete offered set.

Packing, identification and delivery

Keep sockets, wedges, pins and locking parts identifiable as matched sets. Mark the model and rope reference and reconcile spare components separately.

Quotation and order planning

Send quantities by exact model and configuration, destination, requested delivery date and required quotation terms. Identify complete assemblies, loose components and spares separately. Ask the quotation to confirm minimum order quantity where applicable, delivery proposal, packing, inspection documents and any phased-shipment requirements. Agree the actual commercial and documentation scope before order release.

Buyer questions

Can a wedge be substituted because it fits inside the socket?

Confirm the exact matched socket and wedge model, rope construction and required duty using manufacturer information and the approved assembly. Physical fit alone does not establish an acceptable set.

How should Galvanized Open Wedge Sockets, 1/2 & 3/8 in be identified in the RFQ?

Use the exact offered model and project BOQ item, with the approved drawing revision, required quantity and destination. Include the product-specific approval inputs above and identify any separately requested accessories or documents.

Related selection resources

Send the BOQ and drawings for quotation

QUOTATION CHECKLIST

Send these details for an accurate offer.

A complete RFQ helps KOVYEL confirm the product configuration, production basis, documentation, export packing and delivery proposal without repeated clarification.

01Exact hardware type and size
02Required working or ultimate load
03End and pin configuration
04Material and finish
05Applicable standard or drawing
06Quantity and packing requirement

Have a BOQ, drawing or equipment schedule?

Send the technical documents with the form below. KOVYEL will review the product interface, required standard, quantity and destination before preparing the quotation.

Send Project RFQ →

PRODUCT SELECTION AND PROCUREMENT

Compare products and prepare your quotation.

Review the published dimensions, duty and interfaces for each item. Related catalogue products are comparison references; suitability and interchangeability follow the confirmed specification.

PROJECT INQUIRY

Request a quotation for Cast Steel 1/2” 3/8” Wire Rope Open Wedge Socket Galvanized

Inquiry scope: Cast Steel 1/2” 3/8” Wire Rope Open Wedge Socket Galvanized

Add technical details (optional)